Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
You can change the timer at any time by tou-
ching the
symbol and later the
symbols. They will then light up. The two beeps
you hear after that will confirm the new time has
been set.
Programming Cooking Time
1 Touch the
symbol on the glass surface. It
will begin to flash. 0:00 will appear on the dis-
play and the
and
2 Touch the
or
the cooking time.
3 2 beeps will then be heard. The
will flash and the display will show the time
left before the oven switches off automati-
cally.
4 Select a cooking function and temperature.
5 When the set cooking time is over, the oven
will turn off and an alarm will sound.
6 Touch any symbol to stop the signal. The
oven will turn on again.
7 Set the controls to 0 to turn off the oven.
You can change the timer at any time by tou-
ching the
symbol and later the
symbols. They will then light up. The two beeps
you hear after that will confirm the new time has
been set.
Programming the Cooking Stop Time
1 Touch the
symbol of the glass surface. It
will begin to flash. The current time will appe-
ar on the display and the
up.
2 Touch the
or
the cooking stop time.
and
will light up.
symbols to programme
symbol
and
and
will light
symbols to programme
3 The alarm will be confirmed by two beeps and
the display will show the current time, while
the
symbol will remain lit to indicate that
the oven will switch itself automatically.
4 Select a cooking function and temperature.
5 Once it is the set time, the oven will turn off,
an audible signal will sound and the
symbol will flash.
6 Touch any symbol to stop the signal. The oven
will turn on again.
7 Set the controls to 0 to turn off the oven.
You can see the set cooking stop time by tou-
ching the
symbol. You can then also change
the timer setting by using the
symbols, which will light up. The two beeps you
hear after that will confirm the new time has
been set.
You can use this function even if you are coo-
king with the oven. If this is the case, follow all
of the above instructions except No. 4.
Programming Cooking Time and Cooking
Stop Time
1 Touch the
symbol on the glass surface.
It will begin to flash. 0:00 will appear on the
display and the
2 Touch the
or
the cooking time.
3 2 beeps will then be heard. The
will flash and the display will show the time
left before the oven switches off automati-
cally.
4 Touch the
symbol of the glass surface. It
will begin to flash. The current time will
appear on the display and the
will light up.
and
and
will light up.
symbols to programme
symbol
and
11
Publicité
Table des Matières
