Kärcher G 2000 ET Manuel D'utilisation page 6

STEP 1:
Attach the handle to the frame of the
pressure washer. Align holes, insert
bolts, and tighten with knobs.
CAUTION
Do not run the engine with a high or low
oil level as this can cause engine dam-
age.
If you have further questions regarding
the engine, please refer to the engine
manual included with the unit.
STEP 1:
Check oil level. Oil level should al-
ways be between the "FULL" and
"ADD" marks on the dipstick.
Be sure the machine is level when
checking the oil level. (Refer to the
engine's operating manual for sea-
sonal grades.).
We recommend that the oil be
changed after the first 5 hours of
use, then once every 25 hours.
STEP 2:
Fill gas tank with unleaded gasoline.
6
English
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS
STEP 2:
Attach the high pressure hose to the
spray gun.
STEP 3:
Attach the wand to the spray gun.
Do not use leaded gasoline.
STEP 3:
Connect the high pressure hose to
the unit's high pressure outlet.
STEP 4:
Connect garden hose to unit's water
inlet.
STEP 5:
Connect garden hose to the cold wa-
ter source and turn water on com-
pletely.
Do not use hot water.
STEP 6:
Unlock the trigger gun safety lock.
Trigger the gun to eliminate trapped
air, wait for a steady flow of water to
emerge from the spray nozzle.
STEP 7:
Slide the throttle control to the RUN
position.