WamBlee W835 Manuel D'instruction page 57

(c)
How often the message is repeated in NMEA (normally
every minute).
(d)
'Removal of messages' (Clean DB): how often messages
no longer received are permanently removed. In general
it is recommended to set a time equal to twice the
repetition time of the radio buoy transmission (30
minutes).
(e)
'Output Data': indicate which outgoing message you
want to have (AIVDM or RATLL). The communication
speed is automatically set on the basis of the chosen
message.
(f)
'Send also data not assigned buoy': if enabled, the
receiver will
unconfigured buoys (up to 20 radio buoys). Unless
otherwise indicated, we recommend leaving this box
unchecked.
(g)
'Send also Battery and Temperature': if selected, the
receiver add the voltage value of the battery and the
surface temperature of the water to the name of the
radio buoy. The format used is the following:
SSSSSSSS; VV.VV; TT.TT
SSSSSSSS: is the name of the radio buoy (8
characters)
VV.VV: is the value of the battery voltage in
Volts.
TT.TT: is the value of the water temperature in
degrees Celsius.
(h)
'Add' button': this button adds the radio buoys that are
to be received. The radio buoy insertion window
provides:
also generate messages also
EN
for
57