Heat-N-Glo Tiara I Guide D'installation page 38

Model:
Tiara II
(Log Set Assembly 844-9330)
CAUTION: Logs are fragile! Carefully
remove the logs from the packaging.
LOG #1 :
Place log #1 in back of the stove so
the notch fits over the pilot and the
back of the log hits the back of the
stove.
LOG #2:
Place log #2 so the semi-circle notch
is in line with the left hole in the
burner pan and push back to the tab.
Make sure no burner ports are
covered in the front.
LOG PLACEMENT
INSTRUCTIONS
1
2
38
3
282-935B 3/01