Heat-N-Glo Tiara I Guide D'installation page 37

Table des Matières

Publicité

Tiara I
Model:
(Log Set Assembly 844-9320)
CAUTION:
Logs are fragile! Carefully remove the
logs from the packaging.
LOG #1:
Place Log #1 behind the back of the
burner with notch over the pilot. Slide
log to the left and make sure that the
log is touching the back of the burner.
LOG #2:
Set Log #2 so that the left end is
against the wall of the firebox and
right end fits inside the radius of the
burner. Make sure the ports on the
burner are clear.
LOG PLACEMENT
INSTRUCTIONS
1
2
37
281-935B 3/01

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Tiara ii

Table des Matières