DrBrowns MilkSPA AC143 Instructions D'utilisation page 5

C
Select the
Temperature
Condition
Manual Time Adjustment: While in the temperature condition mode,
use the UP and DOWN buttons to change the timer setting.
Note: The last used warming time is remembered for your next use.
D
Press the
warming is finished.
CAUTION: DO NOT touch warming chamber during or immediately after use.
5. Promptly remove vessel to avoid overheating. Gently stir or swirl liquid to ensure 6
it warms evenly. DO NOT shake.
WARMING TIME CHART
This chart corresponds to the times pre-programmed into the warmer.
Note: Run two cycles for 5-11 oz (150-325 mL) in frozen plastic bottles.
button to choose the temperature condition of the vessel.
Room Temperature
Starting
button to start the cycle. The timer will count down until the
Refrigerated
Timer Display
Frozen
4