Interior Light; Storage - INVENTOR MP862W Manuel D'utilisateur

Defrosting
It is recommended to defrost the chill box when
3-4mm frost has been accumulated. To implement
the defrosting process, consider the following
steps:
1. Unplug the appliance.
2. Empty the appliance.
3. Keep the door open while the defrosting process
is on progress.
4. Make sure that the interior is free of frost and
clean the chill box with a soft cloth.

Interior Light

Thanks to the interior lighting you can have a better
insight of your products storage. In the event of a
malfunction, you can change the interior light bulb
of the refrigerator by yourself, following the below
steps:
• pull the plug from the socket
• remove the cover from the lighting
• check if the bulb is fully screwed in
• replace it with a bulb of the same type
• replace the cover
• put the plug into the socket

10. STORAGE

When appliance is inactive for an extended period of time, please make sure you follow
the instructions below, for the appropriate storage of your appliance:
• Remove all the items from the interior compartment.
• Clean the removable parts of the device.
• Leave the door open to prevent unpleasant odors.
• Cover the device.
• Store the refrigerator in upright position, in a dry, well ventilated area and avoid direct
sunlight.
EN
• Never use sharp or metal objects to remove frost
while defrosting
• Do not use any mechanical devices or instruments to
accelerate the defrosting process without consulting
15