Network Configuration; Configuration Procedure - Hitachi ATW-MBS-02 Manuel D'installation Et De Fonctionnement

INSTALLATION

3.7 NETWORK CONFIGURATION

It is supplied a computer software tool, Net configuration Tool, inside the USB stick memory for an easy and friendly configuration.
3.7.1 Computer requirements.
It is required to use a personal computer with Microsoft Windows 7 or higher, a free USB port and Java.
3.7.2 Parameters under configuration:
- Parity: Odd/Even/Disabled
- Communication speed: 9600/19200 Bps
Modbus address
-
- Modbus TCP IP

3.7.3 Configuration procedure


Configuration through USB port
This method is required when the device IP is unknown.
1 Connect the network device to a computer by a USB cable (field supplied or available with the Net Configuration Kit)
2 Select the communication port of the computer.
3 Press the button at screen
6 PMML0419A rev.1 - 05/2016