Télécharger Imprimer la page

DSE 503 PLATINIUM FM Guide D'installation page 6

Publicité

Les langues disponibles

Les langues disponibles

REMOTE STARTER
PARKING LIGHT
Press START
*AUTOMATIC
* MANUAL TRANSMISSION
*RS-232 CODE ERROR
ALARM
HORN / SIREN
Press LOCK
NOTE : In the event that the vehicle has the domelight delay longer than 6 sec , in order to avoid the 4 chirps when the doors are locked
by the transmitter, go to Programming Options 4.04 ( Dome Diagnostic) and Disable this feature.
INFRACTION
Press UNLOCK
OVERRIDE / VALET / EMERGENCY
1
IGN
Turn the key to Ign On & within 6 sec.
4
The LED will stay On then Off in a cycle of
5 seconds.
GET IN PROGRAMMING OPTIONS
1
Press Unlock once.
4
Press Lock
for table 1, Unlock
for table 2, Mute, Aux or Option for table
3 and Start
for table 4.
TO SELECT ANOTHER TABLE
Repeat points 3, 4, 5 & 6
TO EXIT PROGRAMMING ** MANDATORY **
Repeat points 2 & 3. Parking lights will flash 5 times to confirm the end of the operation.
INSTALLATION GUIDE 503 PLATINUM
INSTANT DIAGNOSTIC
Stay on 2 sec
2 Flash
then Off
Toggle switch
Valet
Not ready*
is Off
a) start with key to confirm Tach signal
b) check if the loop is cut
c) do not connect hand brake
a) start with key to confirm Tach signal
b) the black loop must be uncut
c) no manual setting sequences are performed
d) hand brake wire must be connected
e) release ( down 2 sec ) and pull ( up 2 sec ) hand brake
RS-232 is sending in gear signal
1 chirp
Normal
2 chirps
Normal
2
Press & hold the programming button.
5
To reactivate the alarm function, repeat step 1 and 2 . System will chirp Twice (2)
with 2 parking light flash to confirm.
2
5
Once a table is selected, press programming
button the number of times to the chosen
option.
4 Flash
5 Flash
Hood
Foot Brake
4 chirps
Door
4 chirps
Door
OFF
IGN
Turn Ign On then Off.
6 Flash
7 Flash
Hand Brake
5 chirps
Hood, F/B, H/B
5 chirps
Hood, F/B, H/B
3
Siren or horn will stop sounding, alarm and
starter kill will be cancelled instantly in case of
lost or malfunction of the transmitter.
3
Hold
the
programming
5 chirps or flashes
6
Press remote button accordingly to the
selected feature
Version 705M2 / 1214
8 Flash
RS-232 Code *
Silence
Ignition
6 chirps
Ignition
button
until

Publicité

loading

Ce manuel est également adapté pour:

503 platinium am