Picture Settings - Furrion FDHS32M1A Manuel D'instructions

Change Settings

Picture Settings

1. Press MENU button, the setup window will
appear on the screen.
2. Use key to highlight Picture mode.
or
3. Use or to highlight the item you would
like to reset, then press
settings.
4. Press MENU to return to the previous menu
or press EXIT at any time to exit the setting.
Picture Selects the display
Mode mode.
Controls the brightness
Brightness
level of the picture.
Controls the contrast
Contrast
level of the picture.
Controls the color level
Color
of the picture.
Tint Controls picture tint.
Controls the sharpness
Sharpness
of the picture.
Color
Selects the color mode.
Temperature
Advanced Advanced picture
Settings settings.
17
to select the
or
Picture Settings
Press or to select Power Saving, Standard, Dynamic, Soft or User
display modes.
Press or to change the brightness to desired level.
*Only adjustable after set "Picture Mode" as "User" mode.
Press or to change the contrast to desired level.
*Only adjustable after set "Picture Mode" as "User" mode.
Press or to change the color to desired level.
*Only adjustable after set "Picture Mode" as "User" mode.
Press or to change the tint to desired level.
*Only available under NTSC mode.
Press or to change the sharpness to desired level.
*Only adjustable after set "Picture Mode" as "User" mode.
Press or to select Normal, Warm or Cool.
Aspect
Noise Reduction
Dynamic Contrast
Press or to select Wide, Zoom, Cinema or Normal.
Press or to select Middle, High, Off or Low.
Press or to select On or Off.