Table Des Matières; Description; Safety; Purpose Of This Manual - Greenlee AML Serie Manuel De L'utilisateur

Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Other Publications ......................................................... 2
Important Safety Information .....................................3-5
Identification .................................................................. 6
Specifications ................................................................ 7
Setting the Super Spool ................................................ 8
Setting the Tool to Drill or Hammer Drill ........................ 8
Installing and Removing Drill Bits .................................. 9
Hoses and Fittings ...................................................... 10
Typical Setup ............................................................... 10
Hose Connections ....................................................... 10
Operation ..................................................................... 11
Maintenance ................................................................ 12
Troubleshooting ........................................................... 13
Español ........................................................................ 15
Français ....................................................................... 29
Deutsch ....................................................................... 43
Italiano ......................................................................... 57

Description

The Greenlee Hydraulic Rotary Impact Drill is intended
for use with impact-type bits for hammer (impact) drill-
ing in concrete, brick, rock and other difficult-to-drill
materials.
Features include a depth gauge, a directional spool for
forward or reverse operation, Super Spool™ for use
on either an Open-Center or Closed-Center hydraulic
system, and an insulated handle for operator comfort
and safety. A flow control cartridge, effective with
Serial Number 300, limits the hydraulic flow to 24.6 l/min
(6.5 gpm), allowing the tool to be connected to a
hydraulic system providing up to 45.4 l/min (12 gpm).
The tool also includes a variable torque output screw
and a built-in safety slip clutch to help prevent operator
injury if the drill bit catches.
Super Spool is protected by U.S. Patent No. 4548229.
Greenlee Tools, Inc.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.

Purpose of this Manual

This manual is intended to familiarize personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.

Other Publications

Tool Owners/Users
SAE Standard J1273 (Hose and Hose Assemblies):
Authorized Greenlee Service Centers
Repair Manual: Publication 99915979
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Super Spool is a trademark of Greenlee Tools, Inc.
KEEP THIS MANUAL
2
Hydraulic Rotary Impact Drill
HID6506 (42309) Hydraulic Rotary Impact Drill
Serial Code AML
Publication 99930323
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070