Functional Description - Makita CJ100D Manuel D'instructions

DESIGNATION OF PARTS (Fig. 1)
1. Power button
2. Battery holder pocket (Backside)
SPECIFICATIONS
Model
Temperature adjustment steps
Material
USB power supply port
Net weight of battery holder and battery
(kg)
Operating time (h)
Rated voltage (V)
Battey cartridge
Net weight (without battery holder and battery)
Net weight (without battery holder and battery)
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
• Operating time may differ depending on battery type and usage condition.

FUNCTIONAL DESCRIPTION

Switch action
To turn on the jacket, push and hold the power button
(about 1.5 seconds). To turn off, push and hold the power
button again.
Temperature adjustment
There are three temperature settings (high, medium, low).
Three LED lights means that the temperature is set to
"high", two LED lights "medium", and one LED light "low".
When you switch on the jacket, the temperature is set to
"high". Each press of the power button cycles through the
jacket's temperature setting.
ASSEMBLY
CAUTION:
• Hold the battery holder and the battery cartridge
firmly when installing or removing battery
cartridge. Failure to hold the battery holder and the
battery cartridge firmly may cause them to slip off your
hands and result in damage to the battery holder and
battery cartridge and a personal injury.
6
3. Power cable (Inside the battery
holder pocket)
CJ100D, CJ101D
With battery BL1013
With battery BL1013
Low
Medium
High
Size
Size
Polyester (94%), spandex (6%)
–
With battery BL1430
0.23
With battery BL1430
APPROX. 4.5
APPROX. 2.5
APPROX. 1.5
10.8
BL1415, BL1415N,
BL1013
S
1.0 kg
X
1.2 kg
Installing or removing battery cartridge to
the battery holder (Fig. 2)
for CJ100D, CJ101D
To install the battery cartridge (5), hold it so that the
battery cartridge front shape fits to that of the battery
holder opening and slip it into place. Insert it all the way
until it locks in place with a little click.
Always insert the battery cartridge all the way until it locks
in place. If not, it may accidentally fall out of the battery
holder, causing injury to you or someone around you.
Do not install the battery cartridge forcibly. If the cartridge
does not slide in easily, it is not being inserted correctly.
To remove the battery cartridge, withdraw it from the
battery holder while pressing the buttons (6) on both sides
of the cartridge.
for DCJ200, DCJ201
To install the battery cartridge (7), align the tongue on the
battery cartridge with the groove in the battery holder and
slip it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator (8) on the
upper side of the button, it is not locked completely.
Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally fall out
of the battery holder, causing injury to you or someone
around you.
4. Battery holder
DCJ200, DCJ201
3
DC 5V, 2.1A
0.60
APPROX. 12.0
APPROX. 6.5
APPROX. 3.5
14.4
BL1430, BL1440
M
1.0 kg
2XL
1.2 kg
With battery BL1830
0.71
With battery BL1830
APPROX. 17.0
APPROX. 9.5
APPROX. 5.0
18
BL1815, BL1815N,
BL1820, BL1830,
BL1840, BL1850
L
1.1 kg
3XL
1.3 kg