Opro9 SmartDiaper FHH201 Mode D'emploi page 3

[Instructions for use]
"Opro9 SmartDiaper" pairing method
1. Please go to the App Store、 Google Play to
download the "Opro9 SmartDiaper" app, and turn on
your mobile device's Bluetooth settings.
2. Open the sensor's battery cover and insert the
provided battery (please make sure to place the battery
correctly, based on its positive and negative terminals),
then replace the battery cover.
3. After opening the App and enabling Bluetooth on
your mobile device, click "Get Started" in the App.
The App will automatically search for nearby sensors.
Sensors have the name format "SmartDiaper- xxxx".
If you can not find any sensors automatically, click the
Rescan button. If you click on the name of a sensor, the
App will guide you through adding your child's name,
gender, and other information and associates it with
the sensor. The next time you use the App, the App will
automatically connect to this sensor.
4. When the App's main screen appears, if the
Bluetooth connection status icon is blue, that means
you are successfully connected! If the icon is gray, it
means that the Bluetooth connection is disconnected.
5.Place the sensor device inside one of the silicone
outer-covers. Make sure to keep the other outer-cover
in a place you will remember.