Publicité
Les langues disponibles
Les langues disponibles
Indications on the front panel
Stereo transmitting
MONO
This means the receiver reception will always be in MONO even during stereo
reception.
SIGNAL
Received signal strenght
How to store the preselections
- Search for the station you want using the SEEK button, or choose the
preselection already memorized and which you wish to change.
- Push MEM and choose the number of the desired preselection using the
PRESET buttons (you can also overwrite a previously established
preselection).
- Input the desired text (abbreviating the name of the transmitter) using the
CHAR buttons.
- The preselection will be memorized after introducing the last character and
pushing the " → " button.
NOTE:
- When a station already stored in the memory is found during a "SEEK", the
preselection will be displayed automatically.
- The antenna selection is stored automatically.
TECHNICAL DATA
- Frequencies received: 87.5 MHz - 108 MHz in 50 KHz steps
- Sensitivity: 5.5dB µ (1.8 µ V)
- Signal/noise ratio: 80 dB ( A-weighted)
- Distortion: mono 0.08 % / stereo 0.2 %
- Channel separation: 40 dB (1 KHz)
- Frequency response: 5 Hz - 15 KHz (-3 dB)
- Two 75 O antenna inputs (selectable)
- Output voltage: 550 mV RMS (mod. 100 %)
- Number of preselections: 40
- Supply voltage: 220 VAC or 125 VAC
Subject to change without notice.
H4500G-ED1-8
Publicité
