osann JET Mode D'emploi page 23

Installation of the Isofix Base Child restraint system
EN
1
2
click!
LOCKED GREEN
UNLOCKED RED
Step 1: Press the two isofix elastic button, and let the Isofix attachments pop up.
Step 2: Place the isofix base on the correct position on the car, make sure that the isofix connectors
can get into these protectors. As picture shows, once hearing a "click", this means the isofix attach-
ments already locked to the car. And make sure the isofix connector is in green window.
To release the Isofix attachments, pull the Isofix release button towards to you.