TomTom PALM GPS 3229 Guide Rapide page 11

Setting up NAVIGATOR 5 software on a Treo 700w smartphone
Setting up NAVIGATOR 5 software on a Treo 700w
smartphone
0your
1
Make sure your device's Bluetooth
functionality is turned on:
a. Go to the Today screen, and
then tap Bluetooth
b. Select Turn on Bluetooth if it is
not already selected.
2
Turn the GPS receiver on and position it in a location with an
unobstructed view of the sky.
3
Start the software:
a. Insert the TomTom NAVIGATOR 5 expansion card into your
device's expansion card slot.
b. When asked if you want to continue, select Yes, and then select
Yes again.
c. After the installation is complete, select OK.
GPS Navigator
.
9