Night Mode - Samsung HW-K850 Mode D'emploi

Masquer les pouces Voir aussi pour HW-K850:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 140
You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE, SPORTS,
MOVIE, and NIGHT.
c NIGHT mode
EFFECT
When changing a channel or music source, the volume difference between
different music input sources is automatically adjusted to be suitable for listening.
c DRC (Dynamic Range Control)
Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the
EFFECT button for about 5 seconds in standby mode to toggle the DRC (Dynamic
Range Control) function ON - DRC and OFF - DRC.
You can select from TREBLE, BASS, or AUDIO SYNC.
• To control the volume of the treble or bass sound, select TREBLE or BASS in
Sound Settings, and then adjust the volume between -3~+3 by using the
Sound control
Up/Down buttons.
• If the video and audio between the TV and your Soundbar are not synchronized,
select AUDIO SYNC in Sound Settings, and then set audio delay between
0~300 milliseconds by using the Up/Down buttons.
c Audio Sync is only supported in some functions.
Press to select a source connected to the Soundbar.
c BT PAIRING mode
To turn on BT PAIRING mode in Bluetooth function, press and hold the SOURCE
SOURCE
button for more than 5 seconds.
Press the & button to pause a music temporarily.
Press the & button again to play the selected music.
Play/Pause
(BT/WIFI)
SOUND
SOUND
Up/Down/
Left/Right
Press Up/Down/Left/Right on the button to select or set functions.
c Music Skip
Press the Right button to select the next music; press the Left button to select the
previous music.
c Anynet+ / Auto Power Link
You can turn the Anynet+ and Auto Power Link on or off.
The Anynet+ and Auto Power Link are controlled by the Right and Left buttons
respectively.
• Anynet+: If connected through an HDMI cable, you can control your Soundbar
with a Samsung TV remote control. Press and hold the Right button for
5 seconds to toggle Anynet+ ON and OFF.
• Auto Power Link: If connected through a digital optical cable, the Soundbar can
automatically turn on when you turn on your TV. Press and hold the Left button for
5 seconds to toggle Auto Power Link ON and OFF.
Press the indicated areas to select Up/Down/Left/Right.
· 20 · English

Publicité

Table des Matières
loading

Table des Matières