Setting Up The Unit - Humanscale ZoN Manuel De L'utilisateur

ENGLISH

SETTING UP THE UNIT

1. Select desired plug option and attach to
the power cord.
MODEL: KSS06-2401500D
INPUT: AC 100-240V 50-60Hz 1.0A
OUTPUT: 24V DC 1.5A
SUPPLIER: HSD ELECTRONICS CO., LTD
4. Turn the air purifier ON by sliding the
Power Switch upward.
CONTROLLING THE FAN SPEED
Off (o)
The Power Switch on the right side of the
unit controls the air purifier's fan speed.
At its lowest position, the unit is turned
off. Slide the switch upward to slowly
increase fan speed.
REPLACING THE PAPER FILTER
After 5 months, the air purifier's Indicator Light will turn yellow, indicating the Paper Filter should soon be
replaced or cleaned. When the light turns red (1 month later), it is time to replace or clean the Paper Filter.
For particularly dirty environments, the filter may need to be changed or cleaned sooner.
To order replacement filters, contact Humanscale Customer Service at 800-400-0625.
2. Connect the Power Cord to the
personal zone air purifier
small input plug.
Zone Speed
Recommended for personal use. Zone
Speed operates in virtual silence and
creates no distracting air flow.
1
3. Plug the Power Cord into the nearest
via the electrical outlet.
Room Speed
Recommended for creating clean air for
an entire room, such as a small office or
bedroom.