weBoost Destination RV Guide D'installation page 5

(STEP 2 cont .)
Attach both wall mounts to the pole
feet located on the pole and fully
extend the pole .
Insert the attached pin into the hole on
the lower bracket to secure wall mount .
Adjust the pole foot bracket so there is
at least 4 feet (1.25 meters) of
separation between the top and
bottom pole feet and wall mounts .
WARNING: Check for and avoid any
powerlines or overhead obstructions .
When the pole is mounted, do not
move the RV . Pole should be taken
down prior to winds over 35 mph (56
kph) and lightning occurances .
upper Pole
Foot
Pole Foot
Wall
Mount
Pole Foot
lower Pole
Foot
Twist each
upper section
counter-clockwise,
extend, and then
turn clockwise to
lock into place.
Wall Mount
4 ft. (1.25 m)
Wall Mount
Pin
NOTE: Use an app
like Opensignal to
point the outside
antenna toward the
nearest cell phone
tower.
ENGLISH 3