Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ÉPIX™ Drive 642 QRG
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean
this product frequently. Usage and environment are contributing factors in
determining the cleaning frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces
light output performance and can cause overheating. This can lead to
reduced light source life and increased mechanical wear.
Cleaning the ÉPIX™ Drive 642:
1.
Unplug the product.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external vents and accessible internal components.
4.
Clean all external surfaces with a mild solution of non-ammonia glass
cleaner or isopropyl alcohol.
5.
Apply a solution directly to a soft, lint-free cotton cloth or a lens
cleaning tissue.
Wipe any dirt or grime to the outside edge of the surface. Gently
polish the surfaces with the lint-free cotton cloth or lens cleaning
tissue until they are free of haze and lint. Always dry the external
surfaces carefully after cleaning them.
14
EN
Publicité
Table des Matières
