Inserting Batteries - 1byone SIMPLETaste 700NA-0009 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

slippery.
EN
When using the scale for the first time, or when changing its location, it
DE
should be turned on, off, and on again. It's surface should also be free of
any objects. Failure to do this may result in inaccurate measurements.
FR
Always keep batteries out of the reach of infants and young children to
ES
prevent them from being swallowed. If swallowed, take immediate
IT
action and contact medical authorities for help.
Cleaning
Clean the scale with a slightly damp cloth. Do not use any chemical/abrasive
cleaning agents.
Storage
If you do not intend to use the scale for a long period of time, remove the
batteries and store the scale in a clean, dry place away from direct sunlight.
Operation
Included Items
1 x Bathroom scale
3 x AAA batteries
Before using the scale for the first time, check the package contents to
ensure all parts are free of visible damage.

Inserting batteries

To insert the batteries, open the battery compartment on the rear of the
scale and remove the compartment cover. Insert 3 AAA batteries, paying
attention to the correct polarity.
02
Select unit before use
1. Wait until "0.0lb" appears.
2. Press the UNIT button on the rear of the scale to select the desired unit
(kg, lb, or st).
Note: After selecting the unit, place the scale on a solid and flat surface and
start the measurement as described below. The scale will shut off
automatically after 10 seconds of inactivity.
Measuring (with lb unit selected)
1. Place the scale on a solid and flat surface.
2. Stand on the scale to turn it on.
03
EN
DE
FR
ES
IT

Publicité

Table des Matières
loading

Table des Matières