Accessories; Operational Guidelines; Normal Operation; Hold Mode - TACKLIFE DM01M Mode D'emploi

2.4 Description of input socket
Description
Input socket
All public input terminals to be measured are connected to test leads in black
COM
or the public output plugs of exclusive multi-function test sockets.
Positive input terminals (connected to a test lead in red) for capacitor
measurement, diode measurement, beep on/off test, temperature
℃/ ℉
measurement, voltage measurement, electric resistance, frequency, duty
V Ω Hz% lives
ratio and live/earth line judgment.
μA and mA positive input terminal (connected to a test lead in red).
A mA
10A positive input terminal (connected to a test lead in red).
10A

2.5 Accessories

Operation Manual
Test lead
K-Type thermocouple(depends on different model, only for the meter with it)

3. Operational guidelines

3.1 Normal operation

3.1.1 Hold mode

In the hold mode, the reading can be maintained on the display unit. Changing the measurement
function position or pressing the key Hold again to exit the hold mode.
Hold mode: entry and exit
1. Press the key "H" and the reading will be held and the symbol "
2. Press the key "H" again to restore the meter to its status for normal measurement.
3.1.2 Backlight & lighting
The meter is equipped with the functions of backlight and lighting so that the operator can access
measurement results even if he is in a darker place. The backlight function can be enabled or
disenabled by the steps below:
1. Press the key to enable backlight and illumination light.
2. Press the key again to manually disenable backlight and illumination light; wait for 15 seconds
until the backlight and illumination light are automatically disenabled.
" will appear on the LCD screen.
- 07 -
One
A pair
A pair