TACKLIFE DM01M Mode D'emploi page 17

4.2.8 DC current
Measuring range
60µA
6mA
60mA
600mA
10.00A
- Overload protection: protective tube for mA measuring range (FF600mA/250V) ; protective tube
for 10A measuring range (FF10A/250V) .
- Maximal input current: mA position: 600mA DC/AC (valid value);
- 10A position: 10A DC/AC (valid value)
- When the measured current is over 5A, the duration of continuous measurement shall not be over
10 seconds. The current measurement shall be carried out 1 minute after the completion of previous
measurement.
4.2.9 AC current
Measuring range
60mA
600mA
10A
- Overload protection: protective tube for mA measuring range (FF600mA/250V) ; protective tube
for 10A measuring range (FF10A/250V) .
- Maximal input voltage: mA position: 600mA DC/AC (valid value);
- 10A position: 10A DC/AC (valid value)
- When the measured current is over 5A, the duration of continuous measurement shall not be over
15 seconds. The current measurement shall be carried out 1 minute after the completion of previous
measurement.
- Frequency response: 40Hz-1kHz True RMS
4.2.10 Temperature (depends on different model, only for the instruments with it)
Measuring range
℃
℉
- Overload protection: 600V DC/AC
Resolution
0.01µA
0.001mA
0.01mA
0.1mA
10mA
Resolution
0.01mA
0.1mA
10mA
Resolution
1℃ -20℃~1000℃
1℉ -4℉~ 1832℉
- 15 -
Accuracy
±(0.8% Reading + 3 digits)
±(1.2% Reading + 3 digits)
Accuracy
±(1% Reading + 3 digits)
±(1.5% Reading + 3 digits)
Accuracy
± (1.0%+3) reading
± (1.0%+3) reading