Storage; Transporting The Machine; Thecnical Specifications; Technical Data - AGREX SP50 Emploi Et Entretien

After every 50 hours of work::
- Grease the wheel-hub by way of the special lubricator
- check that the screws are tight
- check the presure of the tyres
11

- STORAGE

At the end of each season, or in the event of long periods of disuse it is necessary to:
- carefully clean thespreader and its discs of fertiliser.
- check tansmision, distribution and regulation parts. Replace overused or damaged parts.
- tighten all bolts.
- Grease well in order to avoid rusting.
- Park the machine in a closed area if possible and cover it, to protect it from damage cuased due to
climatic conditions. Only the user will benefit when finding the machine in optimal conditions after a
period of disuse.
12

- TRANSPORTING THE MACHINE

The machine is supplied disassembled and packed in cardboard and polythene; therefore read this
instruction and maintenance booklet carefully.
Dispose of the packing properly in binds provided for this purpose.
13

- THECNICAL SPECIFICATIONS

OVERALL DIMENSION
Height Width
Mod.
mm
SP50 950
SP100 1000
SP150 1050

TECHNICAL DATA

Required power (for all models)...............................................................3 kw
Spreading range 2-6 m. (according to the speedy and the type of fertilizer)
14

- DISPOSAL OF THE MACHINE

To protect the environment and to prevent people from being harmed, do not throw away the spreader or
its components, but have it dimolished by an authorised demolisher..
The demolishion should comply to the laws regulating the country of the demolisher.
Wheight
mm Kg
850 40
850 46
850 61
ENGLISH
Capacity
lt
42
100
143
SP
USER'S GUIDE
23