Publicité
Les langues disponibles
Les langues disponibles
• The power socket must be easy to reach so the plug can be removed
quickly in case of emergency.
• Make sure that the fan heater is working correctly: if not, turn the
heater off and have it checked by professionally qualified personnel.
• Make sure that the air-intake grid is not obstructed by objects, fabrics
or anything else to avoid the heater overheating or breaking.
• In the case of a breakdown or fault, switch off the appliance and have
it checked by a professionally qualified technician; repairs made by
unqualified persons can be dangerous and render void the warranty.
DESCRIPTION OF THE APPLIANCE
USE
It is equipped with the following regulation elements, used by pressing
the buttons located below the control panel or the ones on the remote
control. The remote control must be aimed in the direction of the
display next to the switches; for the first use you have to remove the
clear plastic tab on the battery housing (1 battery CR2025).
In detail, the settings are:
- main (I/0) switch. Every time you finish using the fan heater, switch it
off with this switch (pos. "0").
- ventilation/hot air/very hot air: selected by pressing the "
on the panel or remote control, 1 time for ventilation, 2 times for
hot air or 3 times for
- oscillation for alternative "front-low" air direction: function is active,
by pressing the "
remote control, press "swing" then "mode"1 time: the display will
show the function with the lighted sign "SWING".
- timer: switches off fan heater when set time has elapsed. Maximum
time is 7,5 hours. Selected by pressing the "TIMER" key on the panel
or remote control: 1 time for 0,5 hour, 2 times for 1 hours, and so
very hot air.
" key 4 times on the panel. When using the
19
A. Main (I/0) switch
B. Grille outair
C. Selection button
D. Display
E.
Timer button
F.
Remote control
" button
Publicité
