Assembly - LawnMaster CLBL6015A Mode D'emploi

ASSEMBLY

UNPACKING
This product requires assembly.
■ Carefully remove the product and any accessories from the box. Make sure that all items listed in
the packing list are included.
WARNING
Do not use this product if any parts on the Packing List are already assembled
to your product when you unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer installation. Use of a product
that may have been improperly assembled could result in serious personal injury.
■ Inspect the product carefully to make sure no breakage or damage occurred during shipping.
■ Do not discard the packing material until you have carefully inspected and satisfactorily operated
the product.
■ If any parts are damaged or missing, do not operate the product. Return it for replacement to the
retailer from which it was purchased.
CLBL6015A (KIT) PACKING LIST
60V Cordless Blower
Blower Tube
Concentrator Nozzle (with debris scraper)
(1) 60V Max* 2.0 Ah Lithium-Ion Battery
(1) 60V Max* Battery Charger
Operator's Manual
BATTERY
IMPORTANT! The battery pack is not charged when it is purchased. Before using the blower, read all
safety precautions and follow the instructions in the Battery Pack And Charger section. With regular
use, it will need shorter charging time. If storing for a prolonged period of time, remove the battery.
When ready to use again, charge the battery pack for at least 70min again.
TO REMOVE (See Figure 2)
■ Press the release button on the battery pack and remove it from the product.
■ Grasp the blower firmly, and pull the battery pack out of the handle.
NOTE: The battery pack fits onto the blower snugly in order to prevent accidental dislodging. It may
require a strong pull to remove it.
9