Charging The Battery - Epson WF-100 Guide Rapide

Charging the Battery

Note: The battery is not a user-replaceable part.
Plug in the printer to charge the battery, as described on page 3.
■
The battery light is orange when the battery is charging and turns off when the
battery is fully charged. The light flashes if a battery problem occurs.
■
The power light is blue when the printer is turned on and flashes when the printer is
operating. To save power when it is running on the battery, the printer turns off after
several minutes of inactivity. Press the
power off timer, select
■
You can also charge the battery using the USB cable.
Connect the printer to your computer using the USB cable, as shown on page 7.
Wake the computer if it is in sleep or hibernate mode. Charging starts when the
printer is turned off or goes into sleep mode. You can use any USB power source,
including some automobiles.
■
A fully charged battery can print approximately 50 color or 100 black and white
pages. Printing is slower when running on the battery.
■
When you finish using the printer, make sure you press the
Power
light
Menu > Printer Setup > Power Off Timer
Battery
light
button to turn it back on. To adjust the
.
button to turn it off.
Charging the Battery
9