Télécharger Imprimer la page

Orbegozo CO 4000 Manuel D'instructions page 13

Publicité

Les langues disponibles

Les langues disponibles

CO 4000
OPERATING INSTRUCTIONS
• Place the pedestal on a stable table-board. Make sure that all items likely to be damaged by steam are
removed. Keep the steamer out of children's reach.
• Pour the required quantity of cold tap water into the reservoir (consult the cooking guide). Do not exceed
the maximum level (refer to the markings on the inside of the reservoir). Do not put anything in the
reservoir. Do not use wine, meat of vegetable stock or any other liquid.
• Place the food in the steam bowl. Do not add herbs or spices before the end of cooking.
• Place the lid on the steam bowl. Ensure that the handles of the lid are perfectly in line with the handles of
the steam bowl. Do not overfill the steam bowl, thereby blocking the holes in the lid (the steam must be
able to circulate and escape freely.)
• Put the steam bowl on the base. Plug the steam cooker in.
• In most cases, the water poured into the reservoir will be sufficient to cook the food. If necessary due to
personal taste or if some foods require a longer cooking time, water may be added to the reservoir and the
vaporization process continued by following the instructions.
• Once cooking is complete, unplug the cooker. Remove the steam bowl carefully. Gently lift off the lid to
avoid burning yourself (steam can cause burns).
Tips
− We recommend increasing the time if you use more than one cooking container. Put the more loaded
containers in the lower positions.
− You can put different foods in one layer, but should aware that flavors may be mixed.
− When braising different foods, place the time-consuming food in the lower layer.
− When the time left is equal to the time the other food needs, carefully lift the cape hood, put another layer
onto the lower one, and braise them till the food are all finished.
− The use of the mess tin: the rate for rice to water should be 1:15 , the mess tin should be placed above the
layer, and then set the cape hood.
Switch on the power
Make sure that there is enough water in the reservoir before switch on the power. Before set the timer the
power should be switched on. You can set the timer according to instructions.
CLEANING AND MAINTENANCE
• Before cleaning or any other maintenance operation, let the device to get cold and unplug it from the
socket.
• Don't use grinding sanitary products or impregnant to clean the steamer
• Wipe the steamer pedestal and reservoir with wet cloth.
• Periodically clean heater cover to avoid the base v
• The water in the water-containing utensil should be disposed when finishing using the steamer. You should
put clean water into it whenever you use it.
• You should air all components before you pack it away. And you should place it in a safe ad dry place.
Lime elimination
After seven to ten times using, there will be some scale aggradations on the heater. The amount of scale is
determined by the water rigidity in users' region. To avoid heat transform is jammed ad prolong the service
life of steamer, clearing scale at a regular intervals are recommended.
• Pour the liquid mixture of water and white vinegar with 1:1 proportion between water reservoir and heater
cover to the highest level. Any other cleaning products are prohibited to use.
• Other plastic parts like drip tray are not needed to put on when switch on the appliance to clear the scale.
• Set the timer to 20-25 minutes.
• Pull out power plug after the timer is off. Do not pour out vinegar before it becomes cool completely.
ent of the heater cover walling up.
13

Publicité

loading