Introduction; General Features - Fbt StageMaxX 12Ma Mode D'emploi

StageMaxX 12Ma is a bi-amplified speaker designed to be used as a stage monitor but also suitable for use in fixed
installations thanks to the available accessories.
The extremely heavy-duty and resonance free polypropylene cabinet is born from the enormous experience of FBT
in gas injected mold engineering it acoustically behaves like a wooden cabinet allowing the perfect integration of all
the components for an uncompromising quality in a compact, elegant, unobtrusive on stage, extremely
comfortable and easy to carry product.
StageMaxX 12Ma is the right combination of all the quality features to be a perfect stage monitor.
PWM
AMPLIFIER
- 2-way, bi-amplified, bass reflex design cabinet.
- Coaxial custom FBT 12" B&C speaker with 2.5" voice coil.
- B&C 1" exit throat compression driver and 1.7" voice coil.
- High dynamic Class D amplifiers 400W + 100W RMS to provide a pleasant sound even at loud volume.
- High efficiency switch mode power supply.
- Digital Signal Processor with 4 factory equalization presets.
- Control panel with XLR/Jack input and XLR link out, Volume, 4 preset, HP filter.
- 3 frontal status led indicators.
- 90° directivity horn.
- Proprietary filtered algorithms, dynamic equalization at low frequencies, advanced energy control allows an high
SPL while granting reliable and distortion free audio reproduction with high headroom.
- Sturdy gas-injected polypropylene molded enclosures engineered to avoid undesired resonance.
- High SPL in a compact size monitor.
- 35° or 55° tilted front panel for an optimal listening distance for single or multiple users.
- Three ergonomic integrated carrying handles, two M10 rigging points and wall mounting bracket.
- Teflon replaceable feet allow an easy use on stage.
- The coaxial configuration allows perfect alignment of the acoustic centers of the transducers, guaranteeing
symmetry of dispersion and improving focus of the stereo image in Left-Right configuration.
- Bi-amplification design with high dynamic Class D amplifiers delivering 400W + 100W RMS through a switch
mode power supply. Digital Signal Processor with 4 factory equalization presets provides simple and efficient EQ
adjustment to optimize the acoustical response for different applications. The FOH preset allows the use in
suspended installation as well as «drum fill» applications.
- Two lateral M10 rigging points and wall mounting bracket for different applications (optional accessories).
- 3 frontal status led indicators to control ON/OFF limiter and protection state.
- Three ergonomic integrated carrying handles, one frontally placed to easily drag and move the monitor on stage
and the replaceable teflon feet ensure sliding on stage with minimal wear.
- The cabinet has 35° or 55° tilted front panel for an optimal listening distance for single user (35°) or for more users
(55°).

GENERAL FEATURES

SWITCH MODE DIGITAL HARDWARE FOR
POWER SUPPLY PROCESSOR PERMANENT
INSTALLATIONS

INTRODUCTION

LIGHTWEIGHT FLOOR MONITOR
UK
11