Processing; In Ation And Replacement Of Inner And Outer Tires; Disc Brake Maintenance - HITWAY BK1-HW Manuel De L'utilisateur

6.3.Processing

Batteries and power equipment should not be regarded as general household waste disposal. You have
made signi cant contributions to environmental protection by riding electric bicycles. In order to further
avoid unnecessary pollution:
1. Please handle your electric bicycle and all related accessories (batteries) through authorized processing
facilities.
2. Please follow the latest applicable guidelines. If you have any questions, please contact our after-sales
department.

6.4.In ation and replacement of inner and outer tires

In case of insu cient air pressure or di erent air pressure of two tires, please in ate in time to ensure that
the air pressure of the two tires is the same. The default factory tire is 2.8Bar, and the rear wheel is 2.5Bar.
If the tire needs to be replaced due to a at tire or other reasons, please contact our after-sales
department for repair. (You can also go to a bicycle repair shop to repair).

6.5.Disc brake maintenance

1. Insert the elbow into the screw of the brake and x it to the frame. According to the direction of the
screw "left and right tighten", rst turn it gently to the left to loosen the brake slightly.
2. Then, the left (right) hand squeezes the brake, the purpose is to hold the rear brake close to the brake
pads and keep it squeezed.
3. Then use the elbow to tighten the brake backwards until the brake is xed tightly, and then release the
brake, the brake automatically responds, the brake pads are in the right direction, and they will not be
worn.
English / German / French / Spanish / Italian / Dutch / Japan
Https://www.LikeSporting.com
-8-