Axis F44 Guide D'installation page 15

RS232 Connector
5-pin terminal block for the RS232 serial interface used to control auxiliary
equipment. In order to use the RS232 port, a third party application for
AXIS Camera Application Platform is required.
RJ12 Connector
The RJ12 connector is used for connecting the sensor unit to the main
unit. For information on how to shorten the sensor unit cable see Shorten
Sensor Unit Cable on page 10.
SD Card Slot
An SD card (not included) can be used for local recording with removable
storage. For more information, see Specifications on page 15.
NO TICE TICE
NO NO TICE
To prevent corruption of recordings, the SD card should be
unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click Unmount.
Note
For SD card recommendations see www.axis.com
Control Button
The control button is used for:
• Resetting the product to factory default settings. See page 21.
• Connecting to an AXIS Video Hosting System service or AXIS
Internet Dynamic DNS Service. For more information about
these services, see the User Manual.
Specifications
The Axis product is intended for indoor use.
AXIS F44 Main Unit
15