Kimberly-Clark PROFESSIONAL ICON Manuel D'utilisation page 4

Install Dispenser
1. Carefully line the mounted
wall bracket up to the rear,
corresponding bracket pocket
of the dispenser backplate to
complete installation.
2. Once the mounting
bracket is in its designated
corresponding pocket,
carefully lower the dispenser
until the lock button clicks.
3. Fasten the security screw
to completely secure the
dispenser to the mounting
bracket. Do not over-tighten
the security screw!
This is so that the dispenser
does not inadvertently become
separated from the bracket.
4. To remove the dispenser, first
remove the security screw.
Then press the lock button
and lift the dispenser off of the
bracket.
1.
2.
3.
4.