Installing The Appliance - V-ZUG WineCooler V6000 Notice D'installation

20.
Fit seal.
21.
Fit the door on the appliance.
Notice
The door must now be held secure by
somebody.
22.
Fit covers and click into place.
22.
EN-08
20.
21.
Check that the door is
securely fitted to the
appliance and closes
properly.

Installing the appliance

The installation work should only be carried out by trained personnel.
Two people are required for the installation work.
Note
Check the installation dimensions before installation.
The intermediate panel and side wall of the kitchen unit must be
perpendicular to each other.
WARNING!
Fire hazard due to dampness!
If live parts or the mains power cable become
damp this may cause short circuits.
- The appliance is designed for use in enclosed
areas. Do not operate the appliance outdoors
or in areas where it is exposed to splash water
or damp conditions.
- Only use the appliance when it is installed.
1.
Remove the transpor-
tation safety component.
2.
Route the mains cable towards the socket.
WARNING!
Fire hazard from short-circuiting!
- When pushing the appliance into the recess,
take care not to crush, jam or damage the
mains power cable.
- Do not operate the appliance with a defective
mains power cable.
3.
Slide the appliance two-thirds of the
way into the recess.
When sliding in the appliance, make sure
that the mains cable is not damaged.
1.
3.