Eneo VMC-27LED Mode D'emploi page 31

• Color Temp is used to control color temperature. (User, Normal, Warm, Cool)
• Alarm is input for the alarm level (Max 5 Vdc) of sensor or any alarm device.
- Alarm menu (pull-down menu)
Alarm
Enable
Source
Time
Option
Buzzer
Volume
Display Type
• Energy Saving change the Display Backlight. (OFF, Medium, Maximum) (27" only)
When decreasing the backlight, the brightness of the black becomes darker without any loss in
video signal and the power consumption is reduced.
• 3D NR disable.
• Anti Burn disable.
• Recall the monitor original factory setting.
• Source selects between the CVBS (Composite INPUT), S-Video (Super Video INPUT),
RGB (PC INPUT), DVR, DVI or HDMI to be displayed.
● OSD Menu
OSD Menu
Language
H Position
V Position
Blending
Time
• Language change the OSD language according to personal preference.
• H Position is used to adjust the horizontal position of the Menu window on the screen.
• V Position is used to adjust the vertical position of the Menu window on the screen.
• Blending is used adjust the opaqueness of the background of the OSD.
• Time is used to adjust the OSD view time.
●PIP Menu
PIP
Multi Window
Sub Source
Size
Position
• Multi Window is change the display type. (PIP / PBP 4:3 / PBP Full)
• Sub Source select the input source the sub screen.
• Size select the PIP sub screen display size. (Small / Middle / Large)
• Position adjust the PIP sub screen display position. (U_L / D_L / D_R / U_R)
Enable is used ON or OFF the alarm function.
Source select the input source the alarm screen.
< On >
Time is used to adjust the alarm view time.
< CVBS1 >
< 10 > Option selects the N.O. or N.C. mode.
< N.O. >
Buzzer is used ON or OFF the alarm sound function.
< OFF >
Volume is used to adjust the buzzer value.
40
< FULL >
Display Type change the Alarm display type.
Note: Alarm that fit the N.O. or N.C. case an endless loop.
< English >
< 45 >
OFF >
< CVBS1 >
Small >
< U_L >
(Full or PIP&Full Mode)
11