TRADINGZONE SMARTLINE STESI Instructions De Montage Et D'utilisation page 24

SAFETY INSTRUCTIONS
17. Connection plug boards must be fixed
properly for easy plugging and unplugging.
Plugs and connection plug boards must
be located in such a way that no fluids
come into contact with electrical
equipment when the office furniture is
used properly.
18. The power cable must be secured in
the strain relief of the leg frame.
Interconnecting cables may be run loosely.
All lines and cables must be run in such a
manner as to avoid mechanical damage
(i.e., shearing, abrasion...).
19. Desks with flexible or height-adjustable
worktops require special care. Cables
must be sufficiently long to allow height
adjustments without damaging the cables
and wiring (i.e., stretching, crushing, ...).
20. If the power cord of this equipment is
damaged, it must be replaced by the
manufacturer, their customer service, or
a similarly qualified person so as to avoid
any risk.
21. Do not spill liquids into the control unit
or power supply unit, as this could cause
electrical shock or short circuits.
22. The operation of the control mechanism
and the power supply unit requires a
minimum of 5°C and a maximum
temperature of 40°C.
24