Power Consumption; Install The Hardware - Axis Q8665-E Guide D'installation

Power Consumption

Product Input Voltage
AXIS 24 V AC
Q8665–E 120 V AC
230 V AC

Install the Hardware

Install the Bracket (sold separately)
The brackets are sold separately. See www.axis.com for information on available mounting
accessories.
WARNING
Risk of injury. Make sure the product is secured to the building surface before operation.
Important
• When attaching the bracket to a concrete surface, use dowel pins with a traction torque
rating of ≤300 dN.
• When attaching the bracket to a metal surface, use screws with a diameter of 8 mm.
1. Prepare a wall, parapet or pole for installing the selected bracket.
2. Route the network and power cable through the bracket. Leave a cable slack of
50 cm (12 in) for connection to the base unit.
AXIS Q8665–E PTZ Network Camera
Max Consumption
55 W
15
Typical Consumption
40 W