Functionality; Scope Of Delivery; Fit The Handle; Mount/Empty The Grass Catcher (Optionally Available) - Grizzly HRM 38 Traduction De La Notice D'utilisation Originale

Functionality

The lawn mower has a reel blade cylinder
containing 5 bow-shaped blades. Its cut-
ting height is infinitely adjustable, and its
wheels turn smoothly.
Read the sections below to learn more
about each operating element's function.

Scope of Delivery

- Mower
- Handle top
- Handle bottom
- 2 centrepieces
- 4 screws
- 4 nuts
- Machine key
- Metal strip (feeler gauge)
- Instruction Manual

Fit the Handle

1. Press both ends of the handle
bottom (6) together and insert
them vertically through the
handle holder (7) on the ma-
chine.
2. Push the holes at the ends over
the two holder bolts (19).
3. Screw the handle top (1) firmly
onto both centrepieces (2).
4. Screw the centrepieces onto the
handle bottom (6).
The two centre bars can be se-
cured in two positions to adjust the
handle bar to your height.
Mount/empty
the grass catcher
(Optionally available)
Use only the original grass catcher
GRIZLY HRM38; Product No. 76101130
Assemble the grass catcher:
1. Join the three bars of the grass
catcher linkage (20)
2. Insert the grass catcher linkage
(20) into the grass catcher net
(21).
3. Pull the plastic straps (22) over
the grass catcher linkage.
Thread in the belt
4. The grass collecting basket has
a hole on the top (23). Pull the
end of the belt through the hole
(23), under the frame (20). Now
thread in the hanging hook (24)
(the hook points towards the
grass collecting basket handle).
5. Fix the end of the belt onto the
plastic buckle (25).
Mount grass catcher on lawn-
mower:
6. Place the grass catcher (16) on
the mounting bracket (22) pro-
vided at the back of the lawn-
mower.
7. Hook the hanging hook (24) into
the clip ring (27).
8. Adjust the length of the belt so
the grass collecting box does
not drag on the ground.
Remove/empty grass catcher:
9. Lift the grass catcher (16) out of
the mounting bracket (26).
10. Empty the grass catcher and re-
install it.
GB
19