Getting To Know Your Brad Nailer Like A Pro; Features; Anti-Dry Fire; Tethered No-Mar - Campbell Hausfeld CHN70700 Instructions D'utilisation

Operating Instructions and Parts Manual
Getting To Know Your Brad Nailer / Stapler Like A Pro
Bubble
Conversion Switch
Level
Trigger
Rubber Comfort
Grip
Rear Exhaust
Swivel Plug
Quick Clear Nose
Cover
Laser
Low Nail
Indicator
Light
Figure 6 - Components of the Brad Nailer / Stapler
Adjustable
Depth Control
Thumbwheel
Pull-out
Warning
Decal
Nail Loading Area
Magazine
Latch

Features

Work Contact
Element (WCE)

aNtI-dry FIre

This tool is equipped with an Anti-Dry
Tethered
Fire feature. This prevents the Work
No-mar Tip
Contact Element (WCE) from being
pushed in when only a few nails remain.
Simply load new nail clip behind
No-mar Tip
remaining nails to continue shooting.
Storage Post

tetHered No-Mar

Low Nail
The tool is fitted with a no-mar tip which
Indicator
is tethered to the tool to prevent loss
Light
when not mounted to tool. To utilize the
no-mar tip, simply slide it over the tools
WCE.
Battery Cover/
Compartment

loW NaIl INdICator lIgHtS

The tool is equipped with lights on either
side of the tool near the nose. When the
nail count becomes low, the lights will
Magazine
turn yellow. When the nail count is nearly
out, the Anti-Dry Fire feature will engage
and the lights will turn red. (See Loading
the Nailer section).

NaIl PlaCeMeNt laSer PoINter

The tool is equipped with a laser mounted
near the nose. This can be seen through
the wide slots in the WCE and / or
no-mar tip. The laser will indicate exact
placement of the fastener.
emits laser radiation. Do not stare into beam
or view directly with optical instruments.

BuBBle level

Power
Switch The tool is equipped with a bubble level
(in grip)
located on the head cap. This will assist
in aligning the tool for level driving of the
fastener. The bubble level will assist in
vertical and horizontal positioning of the
tool.
CHN70700
This is a Class IIIA
Laser Product that
9
www.chpower.com