Specific Safety Rules; Environmental Protection - Inspire Barbade Notice De Montage

FR
understand the hazards involved. Children shall not play with the appliance. Cleaning and
user maintenance shall not be made by children without supervision.
ES
2) Electrical Safety
PT The product should be installed by an authorized electrician in accordance to national wiring rules.
The replacement of parts of the safety suspension system device shall be performed by the manufacturer,
IT
its service agent or suitably qualified persons.
The mounting of the suspension system shall be performed by the manufacturer, its service agent or
EL
suitably qualified persons.
An all-pole disconnector with isolating distance of 3mm must be incorporated in the fixed wiring in
PL
accordance with the national wiring rules.
This product is in accordance with safety standards into force. Repairs should be exclusively performed
UA
by qualified technicians using original spare parts. Any breach of this instruction may be particularly
dangerous for the users.
RO
EN

3. SPECIFIC SAFETY RULES

Min: 2,3 m

4. ENVIRONMENTAL PROTECTION

Electrical products must not be thrown out with domestic waste. They must be taken
CAUTION!
to a communal collecting point for environmentally friendly disposal in accordance
with local regulations. Contact your local authorities or stockist for advice on recycling.
The packaging material is recyclable. Dispose of the packaging in an environmentally
friendly manner and make it available for the recyclable material collection-service.
42
The fan base mounting bracket can support a load of 19 kgs.
The fan is to installed so that the blades are more than 2,3m above
Min: 0,6 m
the floor and the blades distance to wall min 0.6m.