Installation And Wiring - evenes He-HS 35 Serie Mode D'emploi

installation and Wiring

the system must only be wired by experts
and according to local regulations
Warning! Risk of personal injury! the existing
Health and Safety Regulations must be observed!
Warning! Risk of electric shock! any hazard caused
by electric energy must be avoided general and local
Regulations and directives (e g iec, etc ) must be observed
installation
ensure installation without any strain and mount the pump motor in a
horizontal position (arrow on the pump housing indicates the direction of
flow) (Fig 1) pump motor and electronic housing must not be insulated!
if you need to change the mounting position, the motor housing must be
rotated as follows: (Fig 2a to 2d)
· Loosen the hexagon socket screws
· Rotate the motor housing
· tighten the hexagon socket screws
eVeneS Heating pump He-HS 27