Zanussi ZWG 7120K Notice D'utilisation page 25

– The indicator of Start button flashes.
– The display shows the programme dura-
tion.
2. If necessary, change the temperature and
the spin speed or add available functions.
When you press the relevant button, the in-
dicator of the set function comes on.
Starting a programme without the delay
start
Press the Start button
• The indicator of button Start stops to flash
and the indicator
• The programme starts and the door locks.
• The programme time decreases with steps of
one minute.
Starting a programme with the delay start
• Press the Delay start button
again until the display shows the delay you
want to set. The related symbol comes on.
• Press the Start button :
The appliance starts the countdown.
When the countdown is completed, the pro-
gramme starts automatically.
You can change or cancel the delay start
before you press the Start button. After
pressing the Start button you can only cancel
the delay.
To cancel the delay start:
1. Press the Start button
ance to PAUSE.
2. Press the Delay button
shows '.
3. Press the Start button
programme immediately.
Interruption of a programme
1. Press the button
2. Press the button
programme continues.
Cancel a programme
1. Turn the programme knob to
the programme and to deactivate the appli-
ance.
www.zanussi.com
:
is on.
again and
to set the appli-
. The display
again to start the
. The indicator flashes.
again. The washing
to cancel
2. Turn the programme knob again to activate
the appliance. Now, you can set a new
washing programme.
The appliance does not drain the water.
Changing the options
You can change only some options before they
operate.
1. Press the button
2. Change the options.
3. Press the button
continues.
Open the door
While a programme or the delay start operates,
the appliance door is locked. The indicator
is on.
Caution! If the temperature and level of
the water in the drum are too high, you
cannot open the door.
To open the appliance door when the
delay start operates:
1. Press the button
PAUSE.
2. Wait until the indicator
3. You can open the door..
4. Close the door and press the button but-
ton again. The delay start continues to
operate.
To open the appliance door when the
programme operates:
1. Turn the programme knob to
vate the appliance.
2. Wait for some minutes and then open the
appliance door.
3. Close the appliance door.
4. Set the programme again.
At the end of the programme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
comes on.
• The indicator of the Start/Pause button
goes off.
. The indicator flashes.
again. The programme
to set the appliance to
goes off.
to deacti-
25