Bellux BX5200 Mode D'emploi page 47

All manuals and user guides at all-guides.com
▪ Remove the dirt from the filters (photo 12). The filters may be cleaned under running
water (photo 13).
▪ Do take care to dry them completely before using them again in the machine.
We advise replacing the hepa filter every 3 months to ensure an optimal operation of the
machine. Dirty filters will reduce the suction power drastically. After every cleaning, clean the
dust reservoir and the filter to extend the life span of your machine.
CLEANING THE FLOOR NOZZLE PROPERLY:
▪ Remove the floor nozzle from the upright vacuum cleaner. Press the release button at the
back of the floor nozzle and remove it from the machine.
▪ Slide the release button down and remove the cover (photo 14).
▪ This is mounted rather tightly, which is why everything stays in place during usage. With
the help of a screwdriver, push the release button down.
▪ Remove the rotating floor brush from the floor nozzle (photo 15).
▪
Remove hairs and other dirt that have wrapped around the floor brush (photo 16). Use a
pair of scissors. If you do not clean the floor nozzle regularly, it will become damaged and
your machine will become unusable.
▪ The rotating floor brush may be rinsed off under running water.
▪
Make sure that it is completely dry before using it (photo 17).
Bellux
47
EN