Bellux BX5200 Mode D'emploi page 45

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All manuals and user guides at all-guides.com
that the handle is fastened securely (photo 3).
Place the floor nozzle in the bottom of the machine. You will hear a click if it is correctly
positioned (photo 4). To remove the floor nozzle, press the round release button on the
bottom. You can now pull the floor nozzle out of the machine (photo 5).
Then place the hand-held vacuum cleaner in the machine, as shown here (photo 6). To
remove the hand-held vacuum cleaner, press the release button and remove the hand-
held vacuum cleaner from the machine (photo 7).
CHARGING
Prior to first use, charge the machine for 24 hours in order to be able to utilize the full
capacity of the battery. After this, it suffices to charge the machine for 16 hours.
Connect the adapter to the machine and put the adapter in the outlet
(photo 8).
To extend the life cycle of the battery, you should charge the machine
fully regularly and allow the battery to empty fully regularly.
The machine will heat up slightly during charging; this is normal.
There are 2 indicator lights on the machine:
1 at the level of the hand-held vacuum cleaner
1 at the level of the adapter connection
Only the latter will be lit when the machine is being charged. The light will not go out
when the machine is fully charged. After 16 hours, the machine is fully charged and you
may remove the adapter from the outlet.
The indicator light on the hand-held vacuum cleaner will light up when the battery is
almost empty. This is how you know you should charge the machine.
Make sure that the machine is switched off when you charge the machine.
USE
The machine can be used to vacuum both dirt and small amounts of fluid. Do take into
account that the machine is not suited to vacuum up large amounts of water (or other
Bellux
45
EN

Publicité

Table des Matières
loading

Produits Connexes pour Bellux BX5200

Table des Matières