Operation; Care And Cleaning; Exterior Maintenance; Interior Maintenance - HAMPTON BAY HB7058-304 Guide D'utilisation Et D'entretien

Installation (continued)
3
Mounting the Fixture

Place the back plate of the fixture body (A)
onto the fixture screws (EE) and secure it
into place by using the lock nuts (AA)
provided.

Caulk the upper 2/3
the fixture body (A).

Leave the bottom 1/3
drainage of any water that may leak into
the enclosure.

The manufacturer recommends a
non-drying exterior caulking material. A
good example is a clear silicone rubber
sealant for exterior use.

Operation


Turn on power at the circuit breaker or fuse box.

Turn the light switch on to activate the fixture.

Care and Cleaning

EXTERIOR MAINTENANCE


Use a dry or slightly dampened clean
cloth and wipe the surface of the
fixture.

INTERIOR MAINTENANCE


Disconnect power to the fixture by
turning off the circuit breaker or by
removing the fuse at the fuse box.

Use a dry or slightly dampened clean
cloth to wipe the interior surface of the
fixture.
rds
of the back plate on
rd
un-caulked for
AA
NOTE: Do not use any cleaners with chemicals,
solvents, or harsh abrasives. Use only a dry
soft cloth to dust or wipe carefully. Do not wipe
the LEDs.
6
EE
A