Model Specifications - Dri-Eaz Sahara E Manuel De L'utilisateur

Sahara E (F350)
Sahara HD
For any problems not listed below, call your local distributor or contact our Service Department toll free at 888-867-3235.
PROBLEM
Unit does not operate
Unit vibrates excessively
07-01534D 2013-01 Warranty 07-00419

Model Specifications

Height 18.8" (48 cm)
Width 17.0" (43 cm)
Depth 18.4" (47 cm)
Static
Pres- 1" (2.5 cm)
sure
Motor 0.25 HP
Power 7.2 amps
Height
18.8" (48 cm)
Width 17.0" (43 cm)
Depth 18.3" (47 cm)
Static
Pres- 2.5" (6.4 cm )
sure
Motor 1 HP
Power 10 amps
Troubleshooting
CAUSE
No power to machine
Switch not turned on
Blower wheel jammed
Intake or exhaust blocked
Accumulation of soil on wheel
Speeds One
Rotary
Switch Type
2250 CFM
Rated Airflow
3823 CMH
975 CFM
Tested Airflow
1653 CMH
Overheating Dual Thermal
Cutoffs Protectors
Cord Length 15 ft. (4.6 m)
Speeds Three
Switch Type Rotary
3500 CFM
Rated Airflow
5947 CMH
1560 CFM
Tested Airflow
2645 CMH
Overheating Dual Thermal
Protectors
Cutoffs
Cord Length 25 ft. (7.6 m)
SOLUTION
Plug in the unit; check circuit breaker or fuse
Turn on switch
Remove material jamming wheel
Turn machine off and allow to cool, then remove blockage
Clean blower wheel
4
Weight 24 lbs (11 KG)
Positions 3 (0°, 45°, 90°)
Available as
Carpet
accessory
Clamp
Circuit
Protec- None
tion
Safety
UL, C-UL
Marks
Housing Polyethylene
Weight
36 lbs (26 KG)
Positions 3 (0°, 45°, 90°)
Available as
Carpet
accessory
Clamp
Circuit
Protec- None
tion
Safety
UL, C-UL
Marks
Polyethylene
Housing
Dri-Eaz Products, Inc.