ATOMSTACK A5 Manuel D'installation page 5

4
3
4
Y
X
S t e p 4
1
1
2
3
Front protective
cover *1
1
2
Step4 Required components:
Protective covers on both sides
*2
M5*14 Flat round head
screw*1
M5*8 Countersunk screw
*2
Installation Manual:
1. Fix the laser head on the slider board
with M5*8 countersunk head screws. The
screws must be tightened.
2. Insert the green protective covers on the
left and right sides.
3. Insert the front green protective cover.
4. Fix the front protective cover with M5*14
flat round head screws.
Laser head *1