User Maintenance - BaBylissPro Namo Titanium MiraCurl BNTMC3UC Mode D'emploi

USER MAINTENANCE

The appliance may require cleaning due to a buildup of residue from hair products.
• Ensure the unit is switched off, unplugged and cool.
• Using a damp cloth and mild detergent or soap, wipe the appliance.
• Ensure the unit has dried thoroughly before re-using.
• This iron has no user-serviceable parts. Servicing should only be performed by an
authorized service representative.
NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord
around the unit. Damage will occur at the high flex point of entry into the unit,
causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop
use immediately if damage is visible or if unit stops or operates intermittently.
When not in use, your appliance is easy to store. Allow unit to cool, then simply put
back in the box, and store out of reach of children in safe, dry location. Do not jerk
or strain cord at plug connections.
THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. STATE-OF-THE-ART
TECHNOLOGY ALLOWS THE HEATER TO REACH THE OPERATING TEMPERATURE IN
LESS THAN ONE MINUTE.
DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN
OUT IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL
BE VOIDED.
TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.
BNTMC3UC IB-16108.indd 9-10
CAUTION
STORAGE
NOTICE
WARNING:
IF YOU THINK THE POWER IS
OFF WHEN THE SWITCH IS OFF,
YOU'RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are a dangerous
combination, but did you know that an electrical appliance is
still electrically live even if the switch is off? If the plug is in,
the power is on. So when you are not using your appliances,
keep them unplugged.
ALWAYS UNPLUG SMALL APPLIANCES.
2018/11/2 11:27 AM