Review Your Program; Manual Program Start; Manual Valve Start - Irritrol Rain Dial Plus 6 Guide D'utilisation

Review Your Program

1.Set the Function Switch to Off
2.Set the Program Selector to the program you wish to review, A, B, or C.
3.Turn the Dial to the setting you wish to check. This features reviews settings but
cannot change them.
4.Return the Dial to the Time

Manual PROGRAM Start

Use MANUAL PROGRAM START to run an entire program immediately as well as when
scheduled, for example, to supplement regular watering cycles on especially hot days.
1. Set the Function Switch to Run
2. Set the Program Selector to the program you wish to run, A, B, or C.
3. Turn the Dial to the Time
4.Press the Semi-Auto / Manua l
5. Press the Next Button to advance through all active stations within a program.
Only stations that have run times will operate.
6. When complete, the Automatic schedule resumes.

Manual VALVE Start

Use MANUAL VALVE START to run a valve immediately as well as when scheduled,
for example, to supplement regular watering on especially hot or dry days.
1. Set the Function Switch to Run
2. Turn the Dial to the valve number you want to run.
Note: The Program Selector is not used in this feature.
3. Press the +/- Buttons to SET THE AMOUNT OF TIME TO RUN.
4. Press the Semi-Auto / Manual
Note: The display shows "M" for MANUAL, the valve number in
operation and its remaining watering time.
5. Repeat steps 2 through 4 to start more valves.
.
position when your review is complete.
.
position.
Button to start the selected program.
.
Button to start the selected valve.