Special Features; Select Language; Water Budget - Irritrol Rain Dial Plus 6 Guide D'utilisation

Special Features

CLEAR A PROGRAM
Note: The Clear Program process restores the default program. All scheduled
watering days, start times and valve run times are eliminated. Water Budget becomes
100%.
1. Set the Function Switch to Set Program
2 Turn the Dial to Spl Func. When the display shows "CLR", the controller is ready to
clear the program.
3. Set the Program Selector to A, B, or C (the program you want to clear).
4. Press the + Button. "OK?" is displayed.
5. Press the + Button again. "CLR" is displayed and the program is reset.
6. To clear another program, repeat steps 3, 4 & 5.
7. Turn the Dial to another position when you have completed the Clear Program
process.

SELECT LANGUAGE

1. Set the Function Switch to Set Program
2. Turn the Dial to Spl Func.
3. Press the Next Button.
4. Press the +/- Buttons until the desired language appears. The display shows the
abbreviation of either the default or selected language, ENG = English,
ESP = Spanish, FRA = French, DEU = German, ITA = Italian. English is default.

Water Budget

WATER BUDGET adjusts all watering times in a selected program by a fixed
percentage, from 0 - 200% in 10% increments. Each program can have a different
Water Budget.
1.Set the Function Switch to Set Program
2.Set the Program Selector to the program you wish to budget, A, B, or C.
3.Turn the Dial to %.
4.Press the +/- Buttons to select the desired Water Budget %.
.
.
.