Nuvo NV-P600 Fiche D'instructions page 8

STEP 5: Connect the speakers to the P600. (Fig. 2, Number 4)
– Insert the exposed end of the R (+) speaker connection cable into the P600 R (+) connection slot.
Tighten the P600 R (+) connection screw.
– Repeat the wiring process for the R (-), L (+), and L (-) connection slots.
Note: Make sure the end of each cable is securely held under the appropriate screw connection.
– Repeat procedure to connect additional speakers to other P600 units.
STEP 6: Plug the Ethernet cable into the Ethernet port (
network LAN.
STEP 7: Plug a USB drive into the USB port (
Nuvo Player Portfolio System.)
STEP 8: Plug the 3.5 mm stereo input line into the analog stereo input jack (
Note: Connecting a compatible audio device to the P600, using an analog stereo input line, allows the
user to play music selections from the connected device.
STEP 9: Connect the DIN rail enclosure power to the P601 using the P601 AC connection slots (N and L).
(Fig. 2, Number 2)
Note: The universal power supply will accept any incoming AC voltage worldwide.
STEP 10: Turn on the main power supply to the DIN rail enclosure.
STEP 11: Download and launch the Nuvo Player Portfolio app available on the App Store or on Google
Play. Follow the on-screen instructions in the App to complete the setup.
Note: Google Play and the Google Play logo are trademarks of Google LLC. App Store is a service
mark of Apple Inc., registered in the U.S. and other countries.
) on the P600 to connect directly to the
) on the P600. (Optional to share music content with the
8
). (Optional)